Need help?Do you have a question about the AUDAC AXIR and is the answer not in the manual?
Critical safety guidelines regarding voltage, impedance, mounting, and vibrations to prevent damage or failure.
Precautions against electric shock, distorted sound, and physical misuse of the speaker to avoid damage.
Procedure to determine optimal mounting height and angle based on the desired listening area.
Recommended 3° angle for maximizing the listening area coverage.
Recommended 5° angle for consistent sound pressure across the listening area.
Additional considerations for speaker placement, visibility, and sound shadow effects.
Adjusting power taps to achieve desired polar patterns for specific acoustic situations.
Using the 3-pole euro terminal block for amplifier connection.
How to adjust the speaker's power taps for different output levels.
Steps to switch internal settings for low impedance operation.
Detailed specifications including power, impedance, frequency response, and dimensions.
Critical safety guidelines regarding voltage, impedance, mounting, and vibrations to prevent damage or failure.
Precautions against electric shock, distorted sound, and physical misuse of the speaker to avoid damage.
Procedure to determine optimal mounting height and angle based on the desired listening area.
Recommended 3° angle for maximizing the listening area coverage.
Recommended 5° angle for consistent sound pressure across the listening area.
Additional considerations for speaker placement, visibility, and sound shadow effects.
Adjusting power taps to achieve desired polar patterns for specific acoustic situations.
Using the 3-pole euro terminal block for amplifier connection.
How to adjust the speaker's power taps for different output levels.
Steps to switch internal settings for low impedance operation.
Detailed specifications including power, impedance, frequency response, and dimensions.
General| Sensitivity (1W/1m) | 90 dB |
|---|---|
| Enclosure | Aluminum |
| IP Rating | IP44 |
| Weight | 2.6 Kg |
| Type | Passive |
| Impedance | 8 Ohm |
| Tweeter | 1" |
To Next Page
