AUDAC IMEO2/B - Overview IMEO2: Remote Control

IMEO2 - User manual 011
Overview IMEO2: Remote control
The IMEO2 includes an IR remote controller, which allows
the operation of it from a distance of 6 meters.
1) Power button:
Switches the sound bar between ON and STANDBY mode.
2) MUTE button:
Toggles the status between Mute music or resume the
sound.
3) Source buttons:
Selects the audio source between the various operation
modes:
AUX / BLUETOOTH / HDMI ARC / OPTICAL / COAXIAL/USB.
4) Playback control buttons:
buttons: allows to increase or decrease the
volume level.
buttons: allows to skip to the previous and next tracks
(only in Bluetooth and USB mode)
button: Allows to play / pause / resume playback
in Bluetooth and USB mode. Press and hold to activate the
pairing function in Bluetooth mode or disconnect the currently
paired Bluetooth device.
5) EQ buttons:
Allows to select a preset sound effect. Various presets are
available for FLAT, MUSIC and SPEECH. The optimal at
conguration is selected when the FLAT preset (default
congured), while low frequencies are added when the
MUSIC preset is selected and low frequencies are reduced
when selected the SPEECH preset. Select the optimal preset
according to your application requirements.
/ / PPAIRAIR
VOL+ / VOL-VOL+ / VOL-
USB
1
3
4
2
5