Troubleshooting continued:
ONE EARPHONE IS NOT
CONNECTED TO THE
OTHER ONE
• Power o both earphones by
pressing the Multi-Function but-
ton for 5 seconds. • Then power
both on by holding in the same
button Multi-function button for
2-3 seconds. The earphones will
connect automatically.
EARPHONES ARE NOT
CHARGING
• Make sure the earphones are
properly placed in the Charging
Case Station.
• Make sure the Charging Case
Station battery is fully charged.
• Make sure there is no dirt or
debris covering the charging con-
ductors within the Charging Case
Station or on the earphones.
7 Troubleshooting Continued
To Next Page
Loading...
