@ Tips
- Before resetting the TPMS, the current
pressures of
all four tires must corre-
spond t o the specified values. Adjust the
tire pressu re and reset the pressure in
the tire pressure mon itor ing system ac-
cording to the load you are carrying
~pag e
216.
- Do not store the tire pressures if snow
chains are installed. Otherw ise the sys-
tem could malfunction.
Reset tire pressure monitoring system
(Step2}
Applies to vehicles: with tire pressure monitoring system
Fig. 176 Display: Tire pressure
Fig. 177 Display: Tire pressure
I Reset ! button @ and rocker switch @
~ page 232, fig. 17 4 functions:
Storing tire pressures
.. Turn on the ignition .
.. Select the menu:
> Adjusting* > Tire pres-
sure
> Store.
Entering and confirming
.. Select the menu : Store now
.. Press the I Reset I button @ .
.. Select the menu : Confirm
Tires and wheels 233
.. Press the I Reset I button @ .
Returning to the Start menu
.. Press the I Reset ! button longer than 2 sec-
onds to ret urn from any menu level to the
Start men u.
{!) Tips
Befo re resetting the TPMS, t he current
pressu res of
all four tires mus t corres pond
to the specified values. Adjust the tire
pressure and rese t the pressure in t he tire
press ure monitoring system according to
the load you are carrying
~
page 216 .
To Next Page
Loading...
