98 Transmis sion
dealer or qualified repair facility immediately
to have the malfunction corrected.
[O] ffl Transmission malfunction: No reverse
You can continue driving
S tron ic® transmission: There is a system ma l-
function in the transmission . The transmis-
sion is switc hing to emergency mode . This
mode on ly shifts into certain gears or w ill no
longe r shift at all. The engine may stall. You
cannot engage the reverse gear. Drive to your
author ized Audi dealer or qualif ied repair fa -
cility immediately to have the ma lf unction
corrected.
[O] Transmission malfunction : Stop vehicle
and shift to park.
Do not cont inue driving. Select t he P selector
lever position and see your authorized Audi
dealer or qualified repair facility for assis-
tance.
(D Note
If the transmission switches to emergency
mode, you should take the vehicle to an
author ized Audi dealersh ip as soon as pos-
sible to have the cond ition corrected.
Selector lever emergency release
App lies to vehicles: with mu ltitronic/S tronic/t ipt ronic
If the vehicle's power supply fails, the selec-
tor lever can be released in on emergency.
Fig. 10 8 Front center conso le: Removing the ash t ray
insert
Fig. 10 9
Selector lever emergency release
"' To access t he emergency release mecha-
nism, remove the ashtray insert @ using the
release switch @ q fig. 108 .
"' Loosen and remove the cap in t he asht ray
mou nt.
"' You now have access to a pin. Using a screw-
driver or simi lar object, press the pin down
and hold it in that position ¢
fig . 109 .
"' Now press the release button and move the
selector lever to the N posit ion.
The selector lever can only be moved from the
P position if the key is in the lock and the igni-
t ion is switched on. If the power supply fails
(for example, the battery is discharged) and
t he vehicle must be pushed or towed, move
the selecto r lever to th e N position fi rst using
the emergency release.
To Next Page
Loading...
