EasyManua.ls Logo

Audi A4 2013 - Audi Adaptive Cruise Control

Audi A4 2013
302 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Audi adapt iv e cru is e control a n d brakin g guar d 10 1
Vehicles with manual transmission
App lies to vehicles: with Audi adaptive cruise control
The adaptive cruise control is avai lab le from
the 2nd gear through the 6th gea r in the cus-
tomary RPM.
When the adapt ive cruise control is turned on,
you must press the clutch to shift gears (as
usual) . When sh ifting normally or when press-
ing the clutch, the adap t ive cruise control re-
mains turned on.
Afte r you have engaged the gear, you do
not
need to press the gas peda l. The adaptive
cru ise control accelerates automat ically if nec-
essary.
If you press dow n on the clutch fo r too long or
shift/coup le improperly, t he adaptive cruise
control may turn off automat ically.
{D) Tips
You cannot tu rn on the adapt ive cru ise
contro l during a sh ifting operation.
Audi adaptive cruise
control
Description
App lies to vehicles: with Audi adaptive cruise control
Fig. 11 3 Detect ion range
What can Audi adapt ive cruise cont rol do?
The adaptive cruise control works in conjunc -
tion with a radar sensor installed in the front
of the vehicle ¢page 99, fig. 110, which is
subject to desig nated system limits
<=:> page 101 . Stationary objects are disregard-
ed .
On open roads with no traffic, adaptive cruise
control works like a regular cruise contro l sys-
tem. The stored speed is maintained . When
approaching a moving vehicle detected up
ahead, the adaptive cruise control system au-
tomat ica lly slows down to match that vehi -
cle's speed and then maintains the distance
that the dr iver previously stored . As soon as
the syst em does not detec t a vehicle up
ahead, adaptive cruise cont rol accelerates
back up to t he stored speed .
Which functions can be controlled?
When you switch adapt ive cruise control on,
you can set the current speed as the "contro l
speed " ¢ page 102, Switching on and off.
When dr iving, you can stop cru ise contro l
¢ page 103 or change the speed ¢page 103
at any time.
You can also set the distance to t he object
ahead and set the adapt ive cru ise control driv-
ing program
¢ page 104 .

Table of Contents

Related product manuals