12 Instruments and warning/indicator lights
disabled. It is also important to notify your in-
surance company about the loss .
Setting the speed warning
By pressing the I SETI button br iefly, you can
set threshold 1 of the speed warning while
you are dr iving
~ page 88. By mainta ining
pressure on the ISETI button, you de lete the
warning threshold.
Digital clock with date display and
Odometer
Fig. 5 Instrument cluster: odometer
Fig. 6 Instrum ent cluster : reset button
Digital clock/GPS controlled clock*
Depending on the vehicle equ ipment level,
you may choose between the quartz clock or
the GPS controlled clock* (!j in the radio or in
the MMI*. You can learn more about th is in
the MMI manual or in the radio user's manual.
Odometer /t rip odometer
The display of distance dr iven is shown in kilo-
meters "km" or in miles "mi".
- USA mode ls - Miles
- Canada models - Kilometers
The units of measure (kilometers/miles) can
be changed in the radio or
MMI*. You can
learn more about this in the MMI manual or in
the radio user's manual.
The odometer @ shows the total number of
kilometers o r miles that have been driven on
the vehicle .
The tr ip odometer @ shows the distance d riv-
en since it was last reset .
It can be used to
measure short distances. The last digit shows
distances of
100 meters or 1/10 of a mile.
The tr ip odometer can be reset to zero by
pressing the reset button IO.OI
~ fig. 6.
Malfunction message
If there is a malfunction somewhere in the in-
strument cluster,
DEF will appear in the trip
odometer and w ill stay on . Contact your au-
thorized Audi dea le r to have the prob lem cor-
rected.
Immobilizer
When the ignition is switched on, the data on
t he ignition key are scanned automat ically.
If an unauthor ized key was used,
SAFE is dis-
played permanently in the odometer display
field . The vehicle cannot be operated
~ page 33.
(D Tips
- When you switch off the ignition or open
the-driver door, the t ime, date, odome -
ter and temperature are displayed for an
add itiona l
30 seconds.
- You can also call up the display with the
!SET!button
~page 11 wh ile the igni-
tion is switched off.
· Fuel gauge
The fue l gauge works only when t he ignition is
on .
When the needle reaches the red area, the
warning light
Ii] in the instr ument cluster will
illuminate
Qpage 21 . Time to refuel!
The total tank capacity of your vehicle is listed
in ~ page277. .,,.
To Next Page
Loading...
