EasyManua.ls Logo

Audi A4 2013 - Page 53

Audi A4 2013
302 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Turn the knob to the desired position :
Q/ P - In this position , you can adjust the
driver's and front passenger's exterior mirrors
by turning the knob in the desired direction.
(ijjl - The mirrors are heated depending on the
outside temperature.
8 - The exterior mirrors fold in*. You can ad-
just whether or not the mirrors fold in auto-
matically when locking the vehicle using the
radio/MM I*
c::> page 3 7.
Passenger exterior mirror tilt function*
(only with memory for exterior mirrows)
To help you see the curb when backing into a
parking space, the surface of the mirror tilts
slightly . The knob must be in the
P position
for this to happen .
You can adjust the tilted mirror surface by
turning the knob in the desired direction .
When you move out of reverse and into anoth -
er gear, the new mirror position is stored and
assigned to the key you are using.
The mirror goes back into its original position
once you d rive forward faster than 9 mph
(15 km/h) or switch the ignition off.
,&. WARNING
Curved mirror surfaces (convex or spheri-
cal*) increase your field of view. Remem-
ber that vehicles or other objects will ap-
pear smaller and farther away than when
seen in a flat mirror. If you use this mirror
to estimate distances of following vehicles
when changing lanes, you could estimate
incorrectly and cause an accident.
(D Note
- If the mirror housing is moved uninten-
tionally (for example, while parking your
vehicle), then you must first fold the mir-
ror electrically. Do not readjust the mir-
ror housing manually. You could damage
the motor which controls the mirror .
- If you wash the vehicle in an automatic
car wash, you must fold the exterior mir-
rors in to reduce the risk of damage to
-
Clear vision 51
the mirrors . Never fold power folding ex-
terior mirrors* by hand. Only fold them
in and out using the power controls.
(D Tips
- The exterior mirror settings are stored
with the memory function*
c::> page 62.
- If there should be a malfunction in the
electrical system, you can still adjust the
exterior mirrors by pressing the edge of
the mirror.
Dimming the mirrors
N
:!
"'
~:::====~~=~====~ :ll
Fig. 47 Auto mat ic dimming rearview mirror*
Manual dimming rearview mirror
.. Pull the lever on the bottom of the mirror
back .
Automatic dimming rearview mirror*
.. Press the button @ c::> fig. 47 . The indicator
light @ turns on . The rearview and exterior*
mirrors dim automatically when light shines
on them, for example from headlights on a
vehicle to the rear.
A WARNING
-
Electrolyte fluid can leak from automatic
dimming mirrors if the glass is broken.
Electrolyte fluid can irritate skin, eyes and
respiratory system .
- Repeated or prolonged exposure to elec-
trolyte can cause irritation to the respira-
tory system, especially among people
with asthma or other respiratory condi -
tions. Get fresh a ir immediately by leav-
ing the vehicle or, if that is not possible,
open windows and doors all the way .

Table of Contents

Related product manuals