Audi A4 2023 - Interior Lighting

8W10127218G
Lights and Vision
Messages
The following messages may appear depending
on the vehicle equipment:
If the [J indicator light turns on, a bulb has
failed. The displayed message indicates the cause
and possible solutions. If one of the messages re-
mains on, drive immediately to an authorized
Audi dealer or authorized Audi Service Facility to
have the malfunction repaired.
Bi audi adaptive light: malfunction! See own-
er’s manual
Adaptive light is not working. The headlights still
function. Drive immediately to an authorized
Audi dealer or authorized Audi Service Facility to
have the malfunction repaired.
BB Headlight range control: malfunction! See
owner's manual
There is a malfunction in the headlight range
control system, which may cause glare for other
drivers. Drive to an authorized Audi dealer or au-
thorized Audi Service Facility immediately to have
the malfunction corrected.
E@ High beam assistant: malfunction! See own-
er’s manual
You can still switch the high beams on or off
manually. Drive immediately to an authorized
Audi dealer or authorized Audi Service Facility to
have the malfunction repaired.
High beam assistant: currently unavailable.
Camera view limited due to environmental con-
ditions
This message appears if the camera's visual field
is blocked. The system will switch itself off. Try
switching the systems on later.
LB automatic headlights: malfunction! See
‘owner's manual
The light/rain sensor is malfunctioning. In the
AUTO light switch position, the low beams re-
main switched on at all times for safety reasons.
Drive immediately to an authorized Audi dealer
or authorized Audi Service Facility to have the
malfunction repaired.
Interior lighting
Front interior lighti
Fig. 45 Headliner: front interior lighting
Interior lighting buttons
3% - Interior lighting on/off
- Door contact switch on/off. The interior light-
ing is controlled automatically.
Touch-sensitive reading lights
» To turn a reading light on or off, touch the sur-
face @ briefly.
» To activate the manual dimming function,
touch the surface @ when the light is switched
off and keep touching it until the desired
brightness is reached.
Fig. 46 Headliner: rear reading lights
Reading lights
» To switch the reading lamp on or off, press the
~S button @.
» To activate the manual dimming function*,
touch the surface while the light is switched off
~S @ and keep touching it until the desired
brightness is reached.
55