Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
00 – Technical data
1 Safety precautions
(ARL003756; Edition 03.2014)
⇒ “1.1 Safety precautions when working on vehicles with start/
stop system”, page 1
⇒ “1.2 Safety precautions when using testers and measuring in‐
struments during a road test”, page 1
1.1 Safety precautions when working on ve‐
hicles with start/stop system
Note the following when working on vehicles with start/stop sys‐
tem:
WARNING
Risk of injury due to automatic engine start on vehicles with
start/stop system.
♦ On vehicles with activated start/stop system (this is indi‐
cated by a message in the instrument cluster display), the
engine may start automatically on demand.
♦ Therefore it is important to ensure that the start/stop sys‐
tem is deactivated when performing repairs (switch off
ignition, if required switch on ignition again).
1.2 Safety precautions when using testers
and measuring instruments during a
road test
Please note the following points if testers and measuring instru‐
ments have to be used while test driving the vehicle:
WARNING
Risk of accident due to driver distraction and if test equipment
is not secured safely.
Risk of injury if front passenger's airbag is triggered in an ac‐
cident.
• Operating test equipment when driving causes a distrac‐
tion.
• High risk of injury if test equipment is not secured safely.
♦ Always secure test equipment to rear seat with a strap; it
must be operated from there by a second person.
Audi A6 2011 ➤ , Audi A6 Avant 2011 ➤
Electrical system, hybrid - Edition 03.2014
1. Safety precautions 1
To Next Page
Loading...
