2. Checking operation of selector mechanism (shiftlock)
Step 2.1
• Engine running, gearbox in position “D” and vehicle moving at
a speed above 3 km/h.
– Shift gearbox into position “N”. Then select “D” without press‐
ing interlock button -2- or brake pedal.
This operation should be possible.
Step 2.2
• Engine running, gearbox in position “D” and vehicle moving at
a speed below 3 km/h.
– Select position “N” and wait for at least 1 second (do not press
brake pedal); press interlock button -2-:
It should not be possible to select position “R” or “D”.
Step 2.3
• Engine running, gearbox in position “N” and vehicle moving at
a speed below 3 km/h.
– Press brake pedal; do not press interlock button -2-:
It should not be possible to select position “R”.
It should be possible to select position “D”.
Step 2.4
• Engine running, gearbox in position “M”.
– Press "P" button on selector lever handle and move selector
lever to “P”:
“P” should now be selected and displayed in instrument cluster
and on "P" button on selector lever handle. In addition, the "P"
symbol between position “N” and “D/S” should light up on se‐
lected range display - Y5- -item 1-.
The selector lever should spring back automatically into the
automatic gate.
Step 2.5
• Engine running, gearbox in position “M”.
– Move selector lever towards “+” and “–”:
When the vehicle is driven, the gear indicator in the instrument
cluster should change up or down a gear accordingly (where
engine speed permits).
Audi A4 2015 ➤ , Audi A4 Avant 2015 ➤ , Audi A4 China 2016 ➤ , Audi A4 a ...
7-speed dual clutch gearbox 0CJ, 0CK, 0CL, 0DN, 0DP - Edition 08.2018
20 Rep. gr.34 - Controls, housing
To Next Page
Loading...
