Opening and clo sin g
Operation
Applies to: vehicles with garage door opener (Homelink)
Fig. 43 Headlin er: cont rol uni t
Requirement: The buttons in the roof headliner
must be programmed
Q page 46 or
¢
page 47 and the vehicle must be within
range of the system, such as the garage door
ope ner.
• Press the button to open the garage door . The
LED@ blinks or turns on .
• Press the button again to close the garage
door .
@ Tips
To open or close the garage door, press the
button, but do not hold it fo r longer t han
10 seconds or t he ga rage door opener module
will switch to prog ramming mode.
Programming the buttons (version A)
Applies to: vehicles with ga rage doo r opener (Homeli nk}
You can program both fixed code and rolling code
systems using this procedure .
Programming or reprogramming buttons
• Switc h the ign ition on.
• Press and hold the but t on in the roof headline r
¢
page 46, fig. 43 that you would like to pro-
gram fo r at least 10 seconds. Or
• Select :
ICAR I function button> Car system s*
cont rol button > Vehicle sett ings > Garage
door opener> Program garage door opener.
If
th is path is not available, program the button
as descr ibed in version B ¢
page 47.
• Follow the inst ructions in the MMI*.
46
Erasing button programm ing
The prog rammed but t ons cannot be erased ind i-
vidually . They must a ll be erased toge t her . Re-
program the buttons if necessary.
• Sele ct:
I CAR I func t ion button > Car systems*
contr ol button > Vehicle setting s > Garage
door opener > Clear program setting s > Yes.
Displaying the version / status/country code
• Select: !CAR ! function button> Car systems*
cont rol button > Vehicle setting s > Garage
door opener > Version informa t ion.
@ Tips
- Prog ramming through the MMI* is not pos-
sible wit h all infot ainm en t systems.
If th is
is the case, program the buttons as descri-
bed in vers ion B ¢
page 47 .
- The required distance between the hand
transmitte r and the Homelink module in
the radiator grille ¢
page 47, fig. 44 de -
pends on the system that you are program-
ming.
- Depending on the mode l of the system, you
may need to release the button on the re-
mote contro l dur ing programming and
press it again. Hold each position you try for
at least 15 seconds before trying another
posit ion . Keep the turn s ignals on your vehi -
cle in view when doing this .
- After programm ing the garage door opener,
it may be necessary to synchron ize the mo-
tor with the syst em . Refer to the manufac-
t urer 's inst ruct ions.
To Next Page
Loading...
