S ea ts and s tor a ge
Memory function
Memory for driver's seat
Applies to: vehicles with seat memory
The seat adjustment settings for two drivers can
be stored using the memory buttons in the driv -
er's door.
Fig. 64 Driver's door: Seat memory
i
ci:
co
a,
In addition to the setting for the drive r's seat,
the exterior rear view mirror setting can be stor-
ed and recalled through seat memory if the vehi-
cle is properly equipped .
Storing and recalling settings
With the help of the memory buttons 1 and 2
c> fig . 64 the settings for two different drivers
can be stored and recalled
¢ page 62.
The cu rrent set tings are also automatically as -
signed to the remote contro l key being used
when the vehicle is locked . When the vehicle is
un locked , the settings assigned to the remote
control key being used are automatically recal-
led.
Turning seat memo ry on and off
If the IOFFI switch is depressed, the seat memory
is inoperative. When the Memory function is off,
the LED in the button lights up.
All t he st ored se tt ings are retai ned. We recom-
mend using the
IOFFI switch and deactivating the
seat memory if the vehicle is on ly going to be
used
temporarily by a driver whose settings are
not going to be stored.
62
Storing and recalling settings
Applies to: vehicles with seat memory
Storing settings
.,. Adjust the driver's seat .
.,. Adjust the two exterior mirrors.
.,. Press the
ISETI button . The light in the button
will come o n.
.,. Now press a memory button
dII or I]]). If the
storing procedu re is correct, a confirmation
tone will sound.
Recalling settings
"' If the driver's door is open and the ignition is
switched off, tap the corresponding memory
button briefly .
.,. If the driver's door is closed or the ignition is
switched on, press the appropriate memory
button until the stored position is reached .
Successful storage is confirmed audib ly and by
the light in the
ISETI button illuminating
c> page 62, fig. 64 .
When the vehicle is locked, the current settings
are stored and assigned to the remote control
key. But the settings stored on memory buttons
1 to 2 are not de leted. They can be recalled at
any time . When the vehicle is
unlocked , the set-
tings assigned to the remote control key are re-
stored .
If your vehicle is driven by other persons using
your remote control key, you should save your in-
dividual seat position on one of the memory but-
tons . You can recall your settings again simply
and conveniently by pressing t he correspond ing
memory button. When the vehicle is locked,
these settings are automatically re-ass igned to
the remo t e contro l key a nd stored.
A WARNING
- For safety reasons, the seat sett ing can only
be reca lled when the vehicle is stationary-
otherwise you ris k having an accident.
- In an emergency the reca ll proced ure can be
cancelled by pressing the
!OFF! switch or by
tapping of the memory buttons.
To Next Page
Loading...
