Audi RS 3 LMS SEQ - 4.9 Aerodynamics

38
Aerodynamics
It is strongly recommended checking periodically that all bodyworks and their fixations are in good conditions.
Rear wing:
 The rear wing has extensive regulation. Zero is the standard setting for the car.
 Wing angle -5° has considerable influence on the rear down force.
 Wing angle -10° has big influence on the rear down force as well as in drag.
 Lateral plates are individually adjustable.
Front splitter:
 Check periodically the fixations. It has to be in good conditions.
 Check the front splitter angle that has to be at 0° when pitch is 0°.
Pitch:
 Measure the pitch angle on the body shell over the door sill.