40
Configuration
451_062
Reverse gear
A special feature of the gearbox is that the direction of rotation is
reversed for reverse gear. The change gear of the reverse gear
slides into mesh with an idler gear which is fixedly connected to
the change gear of the first gear.
Selector shaft
Input shaft
Output shaft – 1st + 2nd gear
Output shaft – reverse gear
Output shaft – 3rd – 6th gear
Left stub shaft
Right stub shaft
Output flange to
prop shaft
Angle drive
Front axle drive gear wheel
Reversing light switch F4
The change gear of the first gear is itself driven by the input shaft.
When frictional engagement is established between the change
gear and the reverse gear output shaft by synchronisation of the
reverse gear, the reverse gear output shaft transmits the engine
torque to the front axle drive gear.
To Next Page
Loading...
Need help?
General
