Rack Mounting
ORIA requires 1U of vertical rackspace and a minimum of 400mm rack depth, allowing
for cables. It weighs 3.5kg and for fixed installations - such as a studio - the four front
panel mounting screws will provide adequate support. The front panel depth is 8mm
at the mounting positions.
ORIA does not generate significant heat, and is cooled by natural convection. We
recommend that the unit should not be used in locations where the ambient temperature
is greater than 35°C. Ventilation is via slots on either side of the enclosure, and these
must be clear of obstruction.
Do not mount ORIA immediately above or below any other equipment which generates
significant heat, for example, a power amplifier.
To Next Page
Loading...
Need help?
General
