Need help?Do you have a question about the Audient EVO 4 and is the answer not in the manual?
Automatically sets microphone input levels based on input signal.
Essential instructions for safe operation and handling of the device.
Guidelines on avoiding water, heat, and protecting cables during use.
Advises against opening the unit and directs servicing to qualified personnel.
Guide for installing and configuring the EVO 4 on macOS systems.
Guide for installing drivers and configuring the EVO 4 on Windows systems.
Instructions for connecting and using the EVO 4 with iOS and iPadOS devices.
Step-by-step guide for using the Smartgain feature to set microphone levels.
Technical details for mic preamplifiers, including gain, impedance, and SNR.
Technical specifications for DAC outputs and the headphone amplifier.
USB connectivity details and DSP mixer/DAW latency performance figures.
Automatically sets microphone input levels based on input signal.
Essential instructions for safe operation and handling of the device.
Guidelines on avoiding water, heat, and protecting cables during use.
Advises against opening the unit and directs servicing to qualified personnel.
Guide for installing and configuring the EVO 4 on macOS systems.
Guide for installing drivers and configuring the EVO 4 on Windows systems.
Instructions for connecting and using the EVO 4 with iOS and iPadOS devices.
Step-by-step guide for using the Smartgain feature to set microphone levels.
Technical details for mic preamplifiers, including gain, impedance, and SNR.
Technical specifications for DAC outputs and the headphone amplifier.
USB connectivity details and DSP mixer/DAW latency performance figures.
General| Type | Audio Interface |
|---|---|
| Number of Preamps | 2 |
| Bit Depth | 24-bit |
| Bus Powered | Yes |
| Direct Monitoring | Yes |
| Loopback | Yes |
| Phantom Power | 48V |
| Sample Rate | 96 kHz |
| Inputs | 2 x XLR/TRS Combo |
| Outputs | 2 x TRS |
| Simultaneous I/O | 4 in / 4 out |
| USB | USB-C |
| Driver | Class Compliant |
To Next Page
