Need help?Do you have a question about the Audient iD24 and is the answer not in the manual?
General| Type | USB Audio Interface |
|---|---|
| Mic Preamps | 2 |
| ADAT Input | Yes |
| ADAT Output | Yes |
| Analog Outputs | 4 |
| Headphone Outputs | 2 |
| Phantom Power | Yes |
| USB | Yes |
| Sample Rate | Up to 96 kHz |
| Bit Depth | 24-bit |
| Simultaneous I/O | 24 in / 26 out |
| Number of Preamps | 2 |
| Digital Inputs | ADAT |
| USB Version | 2.0 |
| Monitor Outputs | 2 |
| MIDI I/O | No |
| Software | iD Mixer |
| OS Compatibility | Windows, macOS |
| Power | USB Bus Powered |
| Analog Inputs | 2 x XLR/TRS combo jacks |
Lists the key hardware and software features of the Audient iD24.
Step-by-step instructions for installing the iD24 on macOS.
Step-by-step instructions for installing the iD24 on Windows.
Instructions for launching the iD mixer application and updating firmware.
Explains the Class-A mic preamps, line inputs, and DI input specifications.
Details the JFET instrument input on channel one for guitars and basses.
Describes the independent phantom power switch and the switchable -10dB pad.
Explains the switchable hardware high pass filter to remove low frequencies.
Details balanced inserts, normalling, and how to patch external gear.
Describes using the insert return for direct connection to the analogue-to-digital converter.
Information on optical inputs/outputs (ADAT, S/PDIF) and word clock synchronization.
Explains the two pairs of stereo speaker outputs via balanced TRS jack connectors.
Details the independent high-current headphone amplifier with 3.5mm and 6.35mm sockets.
Details the functions of the iD Button, Monitor Controls, and F-Keys.
Explains the 8-segment meters, connection status LED, and Kensington lock.
Describes channel types (Mic, Digital, DAW Returns) and basic mixer functions.
Details channel controls like name, boost, phase flip, pan, solo, mute, fader, and meters.
Explains master mix, cue mix levels, mix meters, and monitor controls within the software.
Covers digital I/O format, clock source, mono mode, dim level, and routing matrix.
Instructions on how to use loop-back channels for recording or streaming audio.
Guide on how to check for and install firmware updates for the iD24.
Steps for setting up the iD24 with Pro Tools, including playback engine and I/O.
Instructions for configuring the iD24 with Logic Pro, including audio device and I/O assignment.
Guide for setting up the iD24 with Cubase and Nuendo, including studio setup.
Steps for configuring the iD24 with Ableton Live, focusing on audio preferences.
Addresses issues like power, audio playback, clicks, and pops.
To Next Page
