19
Direct Access to ADC
The Insert return connection on the iD24
is an electronically balanced input stage
that directly drives the analogue to digital
converter (ADC) for that channel. As such,
this is a great place to input signals directly
to the ADC, bypassing the internal Audient
preamplifiers and minimising any colouration
of the signal.
This makes it useful to patch in external
microphone preamplifiers without adding
additional colouration or noise. It is also
handy for using the iD24’s outputs to drive
external eects before returning them into
your DAW using the insert returns.
Please note; the digital calibration level of
the iD24’s converters is 0dBFS = +12.5dBu.
To Next Page
Loading...
