Audient iD24 - Input Channels - Channel Types

27
Input Channels - Channel Types
The iD Software Mixer features three types of
input channels:
Mic Inputs
These are the inputs where you will see the
signal from the iD24’s two analogue inputs.
Digital Inputs
These are the inputs from the iD’s optical
inputs. The number of digital inputs present
on the iD Software Mixer depends on the
digital input type (S/PDIF or ADAT) and the
sample rate being used.
DAW Returns
These are the signals being played back
from your DAW. The iD24 has six DAW Return
Channels allowing you set up multiple cue
mixes or sends to hardware outboard gear.
Using these three channel types you can
build up your main monitor mix and up to two
additional cue mixes.
It’s important to note that the iD Software
Mixer only controls the monitoring of the
iD24. Changes made to the iD Software Mixer
won’t aect the level present in your DAW or
audio software.