Audient iD24 - Pro Tools Setup

I/O Setup
Go to Setup > I/O... to label your inputs and
outputs and ensure that iD24 is correctly
reporting 10-inputs and 6-outputs to and
from Pro Tools.
For more Pro Tools information consult your
Avid user manuals & documentation.
Operation with Pro Tools
If using Windows, ensure that you have
followed the installation instructions found on
page 12.
With iD24 connected, launch Pro Tools and
ensure that a new session is created at
the desired sample rate. If you are using
Windows, make sure that you have already
set your Latency and Buer Size settings in
the iD System Tray before opening a project.
Changing these mid session will result in Pro
Tools needing to restart.
Playback Engine
Go to Setup > Playback Engine... and ensure
that iD24 is set as the active playback
device.
Pro Tools Setup
45