16
Microphone Preamplifiers
& Line Inputs
iD24 features two classic Audient Console
microphone preamplifiers. These preamps
are based on designs from Audient’s classic
consoles and are the same that are used
across our entire ‘iD interface range’.
The design features discrete Class-A circuitry
providing exceedingly low distortion and
noise performance. From a sonic point of
view, iD24 is fast, open and detailed.
Amphenol ™ XLR/TRS Jack combi-connectors
provide microphone and line inputs. The line
inputs are padded by -10dB before passing
through the microphone preamplifiers to
minimise clipping on line-level signals.
The microphone preamplifiers
feature:
• • 58 dB of clean gain
• • >2.8kΩ input impedance which
provides a punchy tone from any
microphone transducer type
To Next Page
Loading...
