23
Headphone Output
iD24 features an independent high-current
headphone amplifier. This can be accessed
using both the 3.5mm and 6.35mm sockets
found on the front of the unit. The same
audio signal comes out of both connectors
simultaneously, so it does not matter which
you plug your headphones into. You can also
plug in two pairs at the same time.
The headphone output can comfortably drive
a wide range of headphone impedances
meaning that you will get great-sounding
audio no matter what model of headphones
you have.
Speaker Outputs
iD24 has two pairs of stereo speaker outputs
on the back panel in the form of balanced TRS
jack connectors. The outputs are impedance
balanced using the same topology as our
flagship console, the ASP8024.
The outputs are fed from high-quality DACs
(Digital to Analogue Convertors) sending
clean audio to your speakers, perfect for
critical listening.
You can use these outputs for more than just
speakers. A good example of this is if you
want to use a dedicated headphone amplifier
for multiple musicians, you can connect this
up to one or more of these outputs, This is
configured in the iD Software Mixer.
To Next Page
Loading...
