Audient iD24 - iD App & Firmware Update

iD App & Firmware Update
14
Launch the iD Mixer Application
Launch the iD24 Software Mixer application
by finding it in the following folder:
Mac OS
Macintosh HD > Applications > iD
Windows
Start > All Programs > Audient > iD
On macOS, the iD app will launch into the
Menu bar, in the top right corner of the
screen. Click on the small iD icon to access
the features of the application.
On Windows, the iD app will launch into
the system tray, typically in the bottom right
corner of the screen. Right click on the iD icon
to access the features of the application.
For more information on the mixer application
feature set, please refer to page 28 onwards
of this manual.
Check for Firmware Updates
If your computer is connected to the internet,
the iD app will check for firmware updates
whenever a unit is connected. If there is a
firmware update available then the iD app
will notify you.
You can manually check for updates by going
to the Help menu and selecting ‘Check
for Updates’. It will notify you if you’re on the
latest version of firmware or if you need to
update.
Registration With Audient ARC
When you first open the iD Software Mixer
a window will open asking you to register
your unit to Audient ARC. Simply follow the
instructions on-screen to create an account
and register your unit.
This will give you access to free innovative
software and services; meaning you’ll have
everything you need to get recording straight
away.
If you plan on registering the product at a
later time, then you can simply close the
registration window. You’ll see the window
again the next time you use the unit.