Audient EVO 4 User Manual

CONTENTS CONTENTS
10 Firmware Update Procedure
09 Specications
11 Getting Started / Basic Setup
07 Software Features
Quit
Show Loopback Source
About EVO
Visit EVO Knowledge Base
Check for Updates
Set ASIO Buer Size
Set Sample Rate
08 Audio Loop-back
Using Audio Loop-back on Mac
Using Audio Loop-back on Windows
12 Warranty Information
Warranty Statement
Warranty Limitations
05 Registration with ARC
02 Safety Instructions
03 Declaration of Conformities
04 Installation/Setup
01 Overview
Channels 1 + 2
Monitor Mix + Pan
Phantom Power
Volume Knob
Smartgain
06 Hardware Features
Output Volume
Stereo Linking
Phantom Power
Instrument Input
Monitor Mix
Volume Control
Muting
SmartMuting

Audient EVO 4 Specifications

General

Type	Audio Interface
Number of Preamps	2
Bit Depth	24-bit
Bus Powered	Yes
Direct Monitoring	Yes
Loopback	Yes
Phantom Power	48V
Sample Rate	96 kHz
Inputs	2 x XLR/TRS Combo
Outputs	2 x TRS
Simultaneous I/O	4 in / 4 out
USB	USB-C
Driver	Class Compliant