Audient EVO 4 - Audio Loop-back; macOS Audio Loop-back Setup

Using Audio Loop-back Channels on Mac
The rst step of using Audio Loop-back is setting up your computer to
output sound to the Audio Loop-back outputs of EVO 4. On some soft-
ware, you can change this in the software itself in the settings. For details
on how this is done, we’d recommend contacting the developer of your
software or reading through its manual.
Otherwise, for software that doesn’t allow you to set the output channel,
such as web browsers or video call services, you may need to adjust your
output setting in the Mac Audio MIDI setup.
To open the Audio MIDI setup go to nder and click:
Applications > Utilities > audiomidisetup.app
Then select EVO 4 from the list of devices and select Congure Speakers.
Applications > Utilities > audiomidisetup.app
AUDIO LOOP-BACK
Congure Speakers
AUDIO LOOP-BACK AUDIO LOOP-BACK