Audio Pro BASIQ Sub User Manual

1) Power LED:
Green light = ON
Red light = OFF or Standby
2) Mains switch
OFF / AUTO or ON
7) Volume control
8) Speaker level input
WARNING !
To reduce the risk of electric shock, do not open or remove cover or back. Do not expose this appliance to rain or moisture. In case
of malfunction consult qualified service personel.
The exclamation point, within an equilateral triangle, is intended to alert
the user of the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The lightning flash with arrowhead, within an equilateral
triangle, is intended to alert the user of the presence of
uninsulated "dangerous voltage" within the product´s
enclosure; that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
3) Line input
4) Fuse
5) Mains cord (230V)
6) Lo-Pass crossover
(variable 50Hz - 150 Hz)
English
CONTROLS AND INDICATORS
6
TO REDUCE THE RISK OF FIRE,
REPLACE WITH ONLY THE SAME
TYPE AND RATING FUSE.
CAUTION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
DOUBLE INSULATION-
When servicing use only identical parts
BEFORE OPENING
PULL MAIN PLUG
VORSICHT
VOR DEM OFFNEN
NETZSTECKER ZIEHEN
LR
FROM RECEIVER
POWER
ON
AUTO
OFF
INPUT
CROSSOVER
LEVEL
50
150
MIN
MAX
Hz
FUSE TYPE:
T 800 mAL
230V~/50Hz
50 WATTS
CAUTION
CAUTION:
WARNING:
BASIQ SUB
Powered Subwoofer
Audio Pro AB. Sweden
1)
2)
3)
4)
5)
( 6
( 7
( 8

Audio Pro BASIQ Sub Specifications

Amplifier

amplifier power	100 Watt
woofer size	8 inch

Frequency and Filters

frequency range	29-200 Hz
lowpass filter range	50 - 150 Hz

Weight and Dimensions

width	320 mm
height	320 mm
depth	320 mm
weight	9.0 kg

Summary

Controls and Indicators

Power LED

Indicates the subwoofer status with green for ON and red for OFF or Standby.

Mains switch

Controls the power modes: OFF, AUTO (standby/on detection), or ON (continuous).

Line input

Connection port for audio signals from a receiver's subwoofer-out.

Fuse

Specifies the fuse type (T 800 mAL) and safety warning for replacement.

Mains cord (230V)

Identifies the power cord specification and voltage requirement.

Lo-Pass crossover

Adjustable frequency (50Hz - 150Hz) to match subwoofer to satellite speakers.

Volume control

Adjusts the sound level of the subwoofer to the desired output.

Speaker level input

Connection for high-level audio signals directly from amplifier speaker terminals.

Instructions

Unpacking

Guidance on safely unpacking the subwoofer and checking for any potential damages.

Installation

Details two methods for connecting the subwoofer to audio systems.

Functions

Power Switch Operation

Explains the operation of the power switch modes: ON, AUTO, and OFF.

Main Power Indicator

Describes the function of the power LED, indicating ON or Standby/OFF states.

Volume and LowPass Controls

Details the functionality of the volume and adjustable low-pass crossover controls.

Placement and Specifications

Subwoofer Placement

Provides advice on optimal subwoofer placement for room amplification and sound quality.

Troubleshooting

Offers basic checks for subwoofer function issues, suggesting dealer contact if problems persist.

Technical Specifications

Lists key technical details including amplifier power, woofer size, and frequency range.