Audio Pro Bravo FX-04 User Manual

Tekniska data:
Typ:......................................Basreflex
Bestyckning: (Skärmade)
Diskant:.............1” Super Tweeter
Bas:.............................2 x 5 1/4”
Delningsfrekvens:.......................2.200Hz
Frekvensomfång:...............32-50.000Hz
32 - 42.000Hz (-3dB)
Känslighet: (1W / 1M)....................91dB
Impedans:...............................4 ohm
Rek. förstärkareffekt:............25 - 150 W
Dimensioner:(BxHxDmm)....190x1200x260
Technical data:
Enclosure:...........................Bass reflex
Drive units: (Shielded)
Tweeter:............1” Super Tweeter
Woofer:.......................2 x 5 1/4”
Crossover:.................................2.200Hz
Frequency range:..............32-50.000Hz
32 - 42.000Hz (-3dB)
Sensitivity: (1W / 1M)....................91dB
Impedance:.................................4 ohm
Amp. requirement:...............25 - 150 W
Dimensions:(WxHxD mm)...190x1200x260
Placering:
See the enclosed Audio Pro instruction
manual for further information.
Se medföljande Audio Pro instruktions-
bok för ytterligare information.
Placement:
Audio Pro AB, Helsingborg, Sweden
Swedish/English
BRAVO FX-04
FX-04 Tech data.pmd 2005-01-04, 11:451

Audio Pro Bravo FX-04 Specifications

General

Brand	Audio Pro
Model	Bravo FX-04
Category	Speakers
Language	English

Summary

Technical Data

Type

Specifies the speaker enclosure type, such as Bass reflex.

Drive units

Details the speaker drivers used, including whether they are shielded.

Tweeter

Information on the high-frequency driver, typically a Super Tweeter.

Woofer

Specification of the low-frequency driver, e.g., 2 x 5 1/4".

Crossover

The frequency at which the audio signal is split between drivers.

Frequency range

The range of audible frequencies the speaker can reproduce.

Sensitivity

Measures sound output (dB) for a given power input (W) at a specific distance.

Impedance

Electrical resistance of the speaker system, measured in ohms.

Amp. requirement

Recommended range of amplifier power for optimal performance.

Dimensions

Physical measurements of the speaker unit (Width x Height x Depth).

Placement

Manual Reference for Placement

Guidance to consult the enclosed instruction manual for detailed placement information.