8
Using the product
The product can use Bluetooth wireless technology to connect to your device and play music, receive phone calls, etc.
Use the product for whichever of these purposes suits your needs.
Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or applications
via Bluetooth devices.
Power supply ON/OFF
Power
supply
Power switch operation Multi-indicator lamp
ON
Lights in white, then flashes in
white*
1
*
2
OFF Lights in white, then turns off*
2
*1 It may take several seconds for the multi-indicator lamp to light.
*2 For details, refer to “Multi-indicator lamp display” (p.15).
• If the product is on and not connected to a device after 5 minutes, the Bluetooth connection is disabled automatically.
However, the ambience control (p.11) stays on. Also, if the product is on and you are using the playthrough
function (p.13), the product will not turn off.
Wearing the product
Place the side of the product marked “L” (LEFT) over the left ear and the side marked “R”
(RIGHT) over the right ear, slide the slider up or down so that the earpads cover your ears,
and then adjust the headband.
To Next Page
Loading...
Need help?
General
