Need help?Do you have a question about the Audio Technica ATH-M50xSTS-USB and is the answer not in the manual?
General| Type | Closed-back dynamic |
|---|---|
| Driver Diameter | 45 mm |
| Frequency Response | 15 - 28, 000 Hz |
| Impedance | 38 ohms |
| Maximum Input Power | 1, 600 mW |
| Connection Type | USB |
| Microphone Type | Condenser |
| Microphone Polar Pattern | Cardioid |
| Connector | USB Type-A |
| Sensitivity | 99 dB |
| Cable Length | 2.0 m |
| Microphone Sensitivity | -38 dB |
Identifies and describes the main physical components of the headset.
Details the included accessories and alternative earpads for the headset.
Instructions on how to fold the headset housing flat using the swivel mechanism.
Guidance on folding the headset housing into the headband for portability.
Steps for configuring the headset with Windows and macOS operating systems.
How to mute and unmute the microphone by adjusting its position.
Instructions for using the monitor dial to check your voice during use.
Technical data for the headphone drivers, sensitivity, frequency response, and impedance.
Technical data for the microphone type, polar pattern, and frequency response.
Details on system operation, supported OS, sample rates, and bit depth.
Miscellaneous specifications including weight, power supply, cable length, and accessories.
To Next Page
