12
Using the product
Using the Hear-Through mode
To turn the Hear-Through mode ON, long touch (approx. 2 seconds) the
touch sensor on the L (Left) headphone.
• To turn the Hear-Through mode OFF, long touch (approx. 2 seconds)
the touch sensor again.
• A confirmation beep will sound each time you turn this mode ON or
OFF.
• In the Hear-Through mode, you can listen to the surrounding sound without taking the headphones off, via the built-in
microphones.
• Occasionally it may be difficult to hear surrounding sound depending on the volume of the music, etc. that you are
playing. In such a case, turn down the volume of the music, etc.
• Even when you use the Hear-Through mode of this product, the surrounding sound may be difficult to hear
depending on the surrounding situation, etc. Do not use this product in locations where it may be dangerous if you
cannot hear surrounding sound, such as places with heavy traffic, etc.
• When the Hear-Through mode is turned ON, the volume of the music, etc. is automatically reduced in order to
enhance the surrounding sound.
• The Hear-Through mode may not be activated depending on the environment the product is being used in. In such a
case, place the headphones in the charging case, and then take them out.
• When the Hear-Through mode is turned ON, do not cover the microphone part with your hand. If you do so, a loud
sound (howling) will be emitted, and it may adversely affect your hearing ability.
L (Left)
To Next Page
Loading...
