Need help?Do you have a question about the Audio Technica ATW-T1006 and is the answer not in the manual?
General| RF Output Power | 10 mW |
|---|---|
| Power Requirements | 2 x AA Batteries |
| Frequency Range | 2.4 GHz |
| Battery Type | AA |
| Operating Temperature | 0°C to 40°C |
Essential guidelines for safe usage of the equipment, covering general precautions and warnings.
Details compliance with FCC rules and RF exposure guidelines for safe operation.
Specific warnings and instructions for safely handling and replacing receiver batteries.
Guidance on optimal placement of the transmitter for maximum RF performance.
Instructions for connecting the AC adapter and charging the transmitter's internal battery.
Details the buttons, LEDs, and connectors on the ATW-T1006 and ATW-T1007 transmitters.
Procedure for powering the transmitter on and off, including stabilization time.
Explanation of Standard and Conference modes and how to switch between them.
Instructions on how to activate and deactivate the transmitter's mute lock feature.
Guide to adjusting input gain levels and enabling/disabling the low-cut filter.
Explanation of System ID and its role in pairing transmitters with receivers.
Step-by-step instructions for pairing transmitters to a System 10 receiver.
Procedures for clearing specific or all transmitter-receiver pairings.
Instructions to reset transmitter settings to their original factory defaults.
Details on operating frequencies and automatic frequency selection.
Technical specifications for the ATW-T1006 Boundary Microphone Transmitter.
Technical specifications for the ATW-T1007 Microphone Desk Stand Transmitter.
To Next Page
