7 | Page
Maintenance and Troubleshooting
Maintenance
If the camera has not been used for a long time, turn off the power adapter switch and AC plug.
Use a soft cloth or tissue to clean the camera cover.
Use a soft cloth to clean the lens; use a neuter cleanser if badly smeared. Do NOT use a strong or
corrosive cleanser or corrosive cleanser to avoid scuffing.
Troubleshooting
No Video Output & Video Staccato
Make sure that the camera USB cable is properly connected to the PC, the USB port is normal and that
the Power indication light is on.
Disconnect the camera from the USB cable connected to the PC and then re-connect.
Make sure that the video software selects the correct device.
To Next Page
Loading...