Need help?Do you have a question about the AudioEngine A2+ and is the answer not in the manual?
General| Outputs | RCA variable line-out |
|---|---|
| Frequency Response | 65Hz-22kHz ±2.0dB |
| Signal-to-Noise Ratio | >95dB (typical A-weighted) |
| Total Harmonic Distortion | <0.05% at all power settings |
| Type | Powered speakers |
| Amplifier Type | Class AB |
| Power Output | 60W peak power total (15W RMS / 30W peak per channel) |
| Drivers | 2.75" aramid fiber woofers, 3/4" silk dome tweeters |
| Inputs | 3.5mm stereo mini-jack, RCA |
| Dimensions | 6" x 4" x 5.25" (H x W x D) |
| Input Voltage | 100-240V, 50/60Hz |
| Input Impedance | 10k ohms |
| Protection | thermal protection |
To Next Page
