Need help?Do you have a question about the AudioEngine Speaker and is the answer not in the manual?
General| Configuration | 2.0 |
|---|---|
| Type | Bookshelf Speakers |
| Amplifier Type | Class A/B |
| Inputs | 3.5mm stereo mini-jack, RCA L/R |
| Drivers | 1" silk dome tweeter |
Connect the RED (+) and BLACK (-) terminals from the left speaker to the corresponding terminals on the right speaker using the included speaker wire.
Connect the DIN power cable from the power supply to the rear DIN power input connector on the speaker.
Using the appropriate audio cable (either 1/8" mini-jack or RCA), connect the speaker to your audio source.
Turn on the rear panel volume/power knob, and set the volume control to an initial setting of about 3 o'clock.
To Next Page
