Need help?Do you have a question about the AudioEngine A2+ and is the answer not in the manual?
General| Outputs | RCA variable line-out |
|---|---|
| Frequency Response | 65Hz-22kHz ±2.0dB |
| Signal-to-Noise Ratio | >95dB (typical A-weighted) |
| Total Harmonic Distortion | <0.05% at all power settings |
| Type | Powered speakers |
| Amplifier Type | Class AB |
| Power Output | 60W peak power total (15W RMS / 30W peak per channel) |
| Drivers | 2.75" aramid fiber woofers, 3/4" silk dome tweeters |
| Inputs | 3.5mm stereo mini-jack, RCA |
| Dimensions | 6" x 4" x 5.25" (H x W x D) |
| Input Voltage | 100-240V, 50/60Hz |
| Input Impedance | 10k ohms |
| Protection | thermal protection |
Important safety guidelines for using the product.
Step-by-step guide to setting up and operating the speakers.
Connect speaker wires to the left and right speakers.
Connect the power supply to the speaker and outlet.
Connect the audio source using appropriate cables.
Solutions for common issues with the speakers.
To Next Page
