Need help?Do you have a question about the AudioEngine 2 and is the answer not in the manual?
General| Frequency Response | 65Hz-22kHz ±2.0dB |
|---|---|
| Amplifier Type | Class AB |
| THD+N | <0.05% at all power settings |
| Input Impedance | 10k Ohm |
| Type | Active |
| Drivers | 2.75" aramid fiber woofer, 0.75" silk dome tweeter |
| Inputs | 3.5mm stereo mini-jack, RCA L/R |
| Outputs | 1 x RCA |
| SNR | >95dB |
| Input Voltages | 100-240V AC |
| Dimensions (each speaker) | 6 x 4 x 5.25 inches |
| Finish Options | Black, White |
| Power Output | 15W RMS per channel (30W peak) |
Procedure for safely unpacking the Audioengine 2 speakers.
Recommendations for optimal positioning of the speakers for listening.
Instructions on how to clean the speaker cabinets and components.
Step-by-step guide to connect the speaker wire between the two speakers.
Instructions for connecting the power cord and power supply unit.
Guidance on connecting audio devices like computers or phones.
Initial steps for powering on and setting volume for listening.
Details on the materials used in the Audioengine 2 speaker construction.
To Next Page
