Need help?Do you have a question about the AudioEngine B1 and is the answer not in the manual?
General| Bluetooth Codecs | aptX HD, aptX, AAC, SBC |
|---|---|
| Output Voltage | 2.0V RMS |
| THD+N | <0.02% |
| Frequency Response | 10Hz-20kHz (+/-0.5dB) |
| Type | Bluetooth Receiver |
| Bluetooth Version | 5.0 |
| Outputs | RCA |
| Signal to Noise Ratio | 100dB |
| Power Supply | 5V USB |
| Dimensions | 3.5 x 3.5 x 1 inches |
Instructions for connecting audio cables from the B1 to the music system.
Instructions for connecting the power adapter and plugging it into an outlet.
Guide to enabling Bluetooth on the user's device.
Steps to select and connect to the Audioengine B1.
Instructions for playing music and adjusting volume.
Addresses issues where the B1's pair button is not illuminated.
Solutions for problems preventing device pairing with the B1.
Steps to resolve connection issues when the pair light is solid.
Troubleshooting steps for when the B1 is connected but no audio plays.
Advice for situations where the audio output level seems low.
To Next Page
