AudioEngine N22 Setup Guide

I
USB Power
Speaker
Connectors
RCA Input
3.5mm
Mini-jack Input ~tt-I--_
Variable
Preamp
Line
Out
Power
What's in the Box
• N22 amplifier with integrated stand
• N22 power supply
• Detachable
AC power cord
• Ya" audio cable, 2 meters (--6.5 ft)
•
RCA audio cable, 1 meters (--3.28 ft)
• Speaker wire
(16AWG),
1.75 meters (--5.75 ft)
• Cloth amplifier bag
• Cloth power supply bag
• Cloth cable bag
• Setup Guide
Works With
• Audioengine P4 passive speakers
• Audioengine wireless audio adapters
• Desktop computers and laptops (Mac and
PC)
• iPods and iPhones
• Headphones
•
Rear channel surround speakers
• Any products
with mini-jack or RCA audio outputs!
Unpacking
Your Audioengine N22 amplifier was carefully tested and inspected before
packaging and shipping. After unpacking please check for any damage. It
is
rare that any damage occurs during shipping, but if this does happen
contact
the shipping company immediately. We recommend that you keep
the original carton and packing material.

AudioEngine N22 Specifications

General

Amplifier class	A/B
Input sensitivity	410 mV
Audio output channels	- channels
Peak power per channel	1800 W
Signal-to-Noise Ratio (SNR)	95 dB
Total Harmonic Distortion (THD)	0.02 %
AC (power) in	Yes
USB 2.0 ports quantity	1
Speakers connectivity type	RCA
Purpose	-
Product color	Black
Volume control	Rotary
Cables included	AC, Audio (3.5mm), RCA
Connectivity technology	Wired & Wireless
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Package weight	4600 g

Weight and Dimensions

Depth	140 mm
Width	70 mm
Height	180 mm
Weight	1600 g