Introduction of 9000N
Key Features
• ESS Sabre ES9038Pro 32bit DAC
• Quad Arm® Cortex®-A53 core,1.8 GHz per Core
• LUMIN MUSIC Streaming technology (IEEE 802.11 a/b/g/n/ac,2.4/5GHz)
• UPnP AV protocol with audio streaming extension (OpenHome)
• Built-in Certified MQA Full decoder (via streaming & PC USB)
• Native support for Spotify Connect, TIDAL Connect, MQA, Qobuz and TuneIn
Radio • Roon Ready
• Gapless Playback
• High-resolution album artwork display
Inputs
• Dual band Wi-Fi connection (802.11 a/b/g/n/ac)
• Gigabit Ethernet port
• USB 2.0 port for replaying audio from a compatible host
• One 12V Trigger input/link
• PC USB
1: Getting Started
Page 5
Welcome to the Audiolab 9000N.
The 9000N combines the incredibly capable and equally stable Lumin streaming
platform with Audiolabs’ digital know-how, world-beating DAC implementation and
signal flow, and the intuitive 9000 series general user interface, for the ultimate
streaming solution.
We hope you will enjoy its performance for many years to come. Please read
through this manual to obtain the very best performance from your 9000N.
Placement
• The Audiolab 9000N
• One USB A-B cable
• One IEC power cord suitable for your area
• One remote handset
• One instruction manual
• One Quick Start Guide
• One APP Operation Guide
Unpacking the Equipment
The carton should contain:
Please note: The remote control requires 2 x AAA type batteries. Due to international
shipping and courier regulations with Lithium-Ion batteries, the remote controller
battery is not included in this package.
Consult the dealer from whom you purchased the equipment if any item is not
present. Carefully unpack the unit and accessories. Take care not to damage the
surface finish when undoing the protective polythene sleeve. Retain the packing
materials for future use. Retain the user manual and information concerning the
date and place of purchase of your equipment for future reference. If you transfer
the unit to a third party, please pass on this instruction manual along with the
equipment.
The unit must be mounted on a solid, level and stable surface.
Before you connect the Audiolab 9000N to the AC mains power, ensure your AC
mains voltage corresponds to the rating on the rear panel of the product. If in
doubt, consult your dealer. If you move to an area that has a different mains
voltage, seek advice from an Audiolab appointed dealer or a competent service
technician.
Outputs
• One balanced analogue output pair
• One unbalanced analogue output pair
• One optical SPDIF digital output
• One coaxial SPDIF digital output
To Next Page
Loading...