Need help?Do you have a question about the Audiolab Q-DAC and is the answer not in the manual?
General| Type | DAC |
|---|---|
| Category | Media Converter |
| Inputs | USB, Coaxial, Optical |
| Supported Sample Rates (Coaxial/Optical) | up to 192kHz |
| Supported Sample Rates (USB) | up to 384kHz |
| Output Impedance | 100 ohms |
| THD | < 0.002% |
| Dynamic Range | > 120dB |
| Headphone Output | Yes |
| Outputs | RCA |
| Sample Rates | 192kHz |
| Bit Depth | 24-bit |
| USB Input | USB |
| Digital Inputs | 1 x USB, 1 x Coaxial, 1 x Optical |
| Analogue Outputs | 1 x RCA |
| Digital Filter | Selectable (Fast Roll-off, Slow Roll-off, Minimum Phase) |
Key safety warnings including electric shock hazard, proper use of accessories, and disconnect device.
Guidelines for safe placement, cleaning, and ventilation of the apparatus.
Overview of the buttons and controls located on the front panel of the Q-DAC.
Details the various input and output ports on the rear of the Q-DAC unit.
Procedure for powering up and shutting down the Q-DAC and connected amplifiers.
Instructions for adjusting the volume using the front panel controls.
Guide to selecting and understanding the various digital filter options for audio tuning.
Instructions on how to access and navigate the Q-DAC's menu system.
Step-by-step guide for installing the USB driver on Mac OS X systems.
Instructions for installing the USB driver on Windows systems via CD/DVD.
Steps to set the Q-DAC as the default audio device and adjust sample rate.
Configuring playback devices and default formats in the sound settings.
Selecting the desired sample rate and bit depth for optimal audio output.
Steps to resolve issues when no audio output is heard from the Q-DAC.
Troubleshooting tips for distorted or low-quality audio playback.
Troubleshooting 'Unlocked' status for USB input, checking connections and compatibility.
Diagnosing and fixing crackling or interference issues during USB playback.
To Next Page
