Need help?Do you have a question about the Audiolab M-DAC + and is the answer not in the manual?
General safety advice including reading instructions, cleaning, ventilation, and plug usage.
Information on mains voltage, fuse, earthing, and terminal safety for correct operation.
Overview of the M-DAC+ front panel controls: Headphone Output, Power LED, Source Selector, Volume, and Standby.
Detailed description of the M-DAC+ rear panel connectors for power, audio, and digital interfaces.
Explanation of each button's function on the remote handset for controlling the M-DAC+.
Information on connecting digital outputs and inputs, including coaxial, optical, and AES/EBU.
Guide to selecting digital filters for PCM and DSD audio to optimize sound quality.
General| Analog Outputs | 1x RCA, 1x XLR |
|---|---|
| Frequency Response | 20Hz - 20kHz (+/- 0.2dB) |
| DAC Chip | ESS Sabre32 9018 |
| Type | DAC |
| Digital Inputs | USB, Coaxial, Optical, AES/EBU |
| THD+N | <0.002% |
| Dynamic Range | >115dB |
| DSD Support | DSD64, DSD128 |
| Digital Outputs | 1 x Coaxial, 1 x Toslink Optical |
| Headphone Output | Yes |
| Sample Rates | Up to 384kHz |
| Output Impedance | 10 Ohms |
To Next Page
