Need help?Do you have a question about the Audiopipe APK-2500 and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| RMS Power at 1 Ohm | 2500W |
| Power Output (Peak) | 5000W |
| Signal-to-Noise Ratio | >90dB |
| Input Sensitivity | 200mV-6V |
| Subsonic Filter | 10Hz - 50Hz |
| Bass Boost Frequency | 45Hz |
| Fuse Rating | 200A |
| Bass Boost | 0dB - 12dB |
| Phase Shift | 0° - 180° |
| Efficiency | 85% |
Highlights efficiency, power, and protection circuits for digital monoblock amplifiers.
Details features of full range multi-channel amplifiers, including filter options and protection.
Lists technical specifications for digital monoblock amplifiers, including frequency response and damping factor.
Provides technical specifications for full range multi-channel amplifiers, covering frequency, SNR, and filters.
Details the input, output, and control connections for digital monoblock amplifiers.
Explains the input, output, and control connections for full range 2-channel amplifiers.
Illustrates input, output, and control connections for full range 4-channel amplifiers.
Details the input, output, and control connections for full range 5-channel amplifiers.
Provides instructions for connecting power (+12V), remote, and ground terminals for amplifier installation.
Guides on connecting speakers to digital monoblock amplifiers, specifying impedance and cable gauge.
Explains how to link digital monoblock amplifiers using RCA cables for master/slave operation.
Details speaker connection configurations for full range 2-channel amplifiers, including bridged modes.
Illustrates speaker connection methods for full range 4-channel amplifiers, covering stereo and bridged setups.
Shows speaker connection configurations for full range 5-channel amplifiers, including bridged and specific channel requirements.
Troubleshooting steps for amplifiers experiencing no sound output, checking connections and fuses.
Addresses issues related to amplifier protection modes, such as overload, overheat, and short circuits.
Guides for resolving audio distortion and noise issues, checking input levels and ground connections.
Provides solutions for poor bass response, focusing on speaker cable polarity and connections.
To Next Page
