How to fix AudioSonic Portable DVD Player remote control failure?
If the AudioSonic Portable DVD Player's remote control isn't working, ensure it's pointed directly at the receiver. The remote should be within 6 meters of the unit. Also, check and replace the batteries, ensuring they are correctly installed.
Why is there no sound on my AudioSonic Portable DVD Player?
If there's no sound from your AudioSonic Portable DVD Player, first, check the volume level and increase it by pressing VOL+. Ensure that the mute function is off by pressing the MUTE button. If you were fast-forwarding or rewinding, press PLAY or PLAY/PAUSE. If headphones are plugged in, unplug them to enable the speaker sound.
What to do if my AudioSonic Portable DVD Player can't play the disc?
If your AudioSonic Portable DVD Player can't play a disc, make sure the disc is inserted correctly with the label side up. Clean the disc to remove any smudges or dirt. Ensure that the disc format is compatible with the player.
Why AudioSonic Portable DVD Player is unable to read from USB or card slot?
If your AudioSonic Portable DVD Player isn't reading from the USB or card slot, power cycle the device by shutting down the electricity and reopening the machine. Non-genuine USB or memory cards may not be supported and can cause power issues. Turn off the machine, and it should return to normal after restarting.
How to troubleshoot no power on AudioSonic Portable DVD Player?
If your AudioSonic Portable DVD Player has no power, ensure the power adapter is securely connected to both the DCIN jack on the device and the electrical outlet.
Why is there no sound coming from my AudioSonic DVD Player?
If you're not getting any sound from your AudioSonic DVD Player, there are a few potential causes: * The volume might be set too low. Try pressing the VOL+ button to increase the sound. * The player might be in Mute mode. Press the MUTE button to restore the sound. * If the player is in REW (Rewind) or FWD (Fast Forward) mode, press PLAY or PLAY/PAUSE to resume normal playback. * If headphones are plugged in, unplug them to hear sound from the speakers.
Why is my AudioSonic DV-1821 remote control not working?
If the remote control for your AudioSonic DVD Player isn't working, consider these possibilities: * Ensure that the remote control is pointed directly at the receiver on the DVD player. * Make sure you are within 6 meters of the DVD player. * The batteries in the remote control might be dead. Try replacing them with new ones. * Check if the remote control has batteries installed.
What to do if my AudioSonic DV-1821 can't play the disc?
If your AudioSonic DVD Player is unable to play a disc, check the following: * Ensure that the disc is inserted correctly, with the correct side facing down. * The disc may be dirty. Clean the disc carefully. * The disc may not be compatible with the DVD player. Try using a compatible disc.
What to do if my AudioSonic DV-1821 has no power?
If your AudioSonic DVD Player isn't turning on, make sure the power adapter is securely connected to both the DCIN jack on the machine and the electrical outlet.
What to do if my AudioSonic DV-1821 DVD Player is unable to read from USB or card slot?
If your AudioSonic DVD Player can't read from a USB drive or memory card: * Try shutting down the electricity and reopening the machine. * The inserted USB or memory card might not be genuine. The unit does not support non-genuine USB or memory cards, which can lead to power issues. Turn the machine off and restart it to return to normal operation.
General| Brand | AudioSonic |
|---|---|
| Model | DV-1821 |
| Category | DVD Player |
| Language | English |
To Next Page
