AudioSource AC5C - User Manual

Congratulations on your purchase of the AudioSource
AC Series In-Ceiling Speaker System. This product is
designed to reproduce the audio portion of your
home entertainment environment with accuracy and
detail that will satisfy the most discriminating listener.
Please read this Installation Manual to ensure the
proper installation and performance of your AC Series
speakers.
Preparing for your Installation
Gather the necessary tools for your installation.
You will need the following tools:
1) A Keyhole or Drywall Saw
2) A Phillips Screwdriver
3) Masking Tape
4) A Pencil
5) A Tape Measure
6) A Stud Finder (recommended)
7) Your AC Series speakers
Placement
Plan your speaker placement carefully. Make certain
that electrical, plumbing and any other services will not
interfere within the ceiling where you plan to install your
speakers. The AC Series speakers can be mounted in
walls, but are typically used in ceilings. The speakers
should be located so that they provide even coverage
at your listening position. The distance between the
speakers should not be greater than the distance from
the speakers to the listening position (See Figure 1).
AC5C
Use a stud finder to locate the joists behind the ceiling
surface. Also, you should now check for obstructions
like cross bracing in front of and behind the desired
speaker location.
5.25” 2-Way In-Ceiling Speakers
11’
16’
20’
11.5’
Figure 1
Existing Construction
In most modern buildings ceiling joists are positioned
on 16” centers, providing a space between the joists of
approximately 14 3/8”. The specifications chart shows
the appropriate cut out sizes (p. 4). Additionally, you
should allow an extra 3/4” in all directions behind the
ceiling surface to allow room for the screw clamps that
mount the speaker to the ceiling to swing into position.

Summary

Preparing for AC5 C Speaker Installation

Gathering Installation Tools

Lists the essential tools required for the installation process.

Speaker Placement Guidance

Provides advice on optimal speaker positioning for even sound coverage.

Existing Construction Considerations

Details how to account for ceiling joists and obstructions.

AC5 C Speaker Installation Steps

Cutting and Mounting Hole

Instructions for cutting the speaker opening and preparing it for mounting.

Connecting Speaker Wire

Guidance on running wire and connecting it to the speaker and amplifier.

Grill Removal and Installation

Procedures for safely removing and reinstalling the speaker grill.

Removing the AC Series Speaker

Instructions on how to detach the speaker from the ceiling mount.

Painting the Speaker

Advice on how to paint speaker frames and grills without affecting performance.

AC5 C Specifications and Warranty

Product Specifications

Technical details including dimensions, frequency response, impedance, and power capacity.

Two Year Limited Warranty

Outlines the warranty coverage, terms, conditions, and claim procedures.

AudioSource AC5C Specifications

Audio Specifications

woofer diameter	5.25 inches
tweeter diameter	19 mm
frequency response	70Hz to 20kHz
impedance	8 ohm
sensitivity	87dB, 2.83v @ 1m
power capacity	10 to 100 Watts

Dimensions

outer diameter	7 13/16 inches (198mm)
cut out diameter	6 13/16 inches (172mm)
mounting depth	2 3/4 inches (70mm)