AudioSource EQ 100 - User Manual

Welcome message and introduction to the AudioSource EQ 100 graphic equalizer.

Warnings and cautions regarding electrical shock, moisture, and product enclosure.

Instructions for safe operation, placement, ventilation, power, and cleaning.

Explanation of how graphic equalizers control sound and their benefits.

Advice on setting objectives and adjusting sliders for desired sound.

How to turn the EQ 100 on and off, and the LED indicator status.

Switching between Audio and Video input sources.

Comparing equalized sound with the original signal by bypassing EQ.

Using the EQ Rec button to make equalization copies onto tape.

Selecting between Line and Tape inputs for audio sources.

Details on using the ten sliders per channel for boost and cut.

Visual display of relative signal levels corresponding to EQ sliders.

Connecting the EQ 100 through the receiver's tape monitor loop.

Instructions for connecting a tape deck to the EQ 100 for recording.

Utilizing video input jacks for other high output sources like CD players.

Detailed technical data including frequency response, distortion, and dimensions.

Chart illustrating slider adjustments for various musical instruments.