128-6799
6 of 8
To replace the transmitter battery:
1. Slide back the lock tab on the back side of the transmitter case in the direction
shown.
2. Slide back the battery case cover in the direction shown.
3. Remove the discharged battery, making note of the location of the + and -
contacts shown, and replace with a new type akaline 1.5 volt AAA Battery.
4. Making note of the location of the (+) and (-) contacts, insert a new AAA
battery alkaline 1.5 volt.
5. Replace battery cover being certain to close the battery case lock clip to
prevent accidential opening.
6
To Next Page
Loading...
Need help?
General