Audiovox Pursuit 07S3BPr - User Manual

128-8181a
1 of 8
1
1
2
1
3
3
*4
*5
BUTTON
RECEIVER
CHANNEL
SYSTEM FUNCTION
Lock And Arm Alarm, also initiate and
terminates *Panic
Unlock And Disarm, also initiates and
terminates *Panic. Programmable to
unlock drivers door and or all doors.
Lock and arm/unlock and disarm. May
be programmed to unlock driver's door
or all doors. Also will initiate and
terminate *Panic.
Pulsed or switched output to control
Remote Trunk Release or optional
device connected to channel 3.
When pressed and release two times,
will provide pulsed output or activate the
Remote Start option when installed.
When so equipped, this button can be
used to operate an optional device
connected to channel 4.
When so equipped, this button can be
used to operate an optional device
connected to channel 5.
These transmitters makes use of icons (symbols) to identify the reac-
tion your security system/keyless entry/and or remote start system,
where applicable, will have when any icon (button) is pressed.
These icons are programmed at time of installation to meet the needs of
the individual and to complement the vehicle that the system is installed
in. To replace a transmitter or add transmitters, please follow the
programming instructions listed on the pages of this manual.
Transmitter Programming Guide
* Where So Equipped
Model 07S3BPr
Rev A: Add new URL 11/4/2011

Audiovox Pursuit 07S3BPr Specifications

General

Brand	Audiovox
Model	Pursuit 07S3BPr
Category	Car Alarm
Remote Start	Yes
Keyless Entry	Yes
Alarm	Yes
LCD Display	Yes
Shock Sensor	Yes
Door Lock Control	Yes
Starter Kill	Yes
Panic Alarm	Yes
Valet Mode	Yes
Type	2-Way Security System

Summary

Transmitter Button Functions

Lock, Arm, and Panic Control

Button 1 locks and arms the system, also initiates and terminates Panic.

Unlock, Disarm, and Door Control

Button 2 unlocks and disarms the system, programmable for single or all doors.

Secondary Lock;Unlock and Panic

Button 3 offers lock/arm, unlock/disarm, and Panic initiation/termination.

Trunk Release and Alternate Output

Channel 3 button controls trunk release or an optional device.

Remote Start and Optional Device 4

OPT.1 (Channel 4) activates Remote Start or an optional device.

Optional Device Channel 5 Operation

OPT.2 (Channel 5) operates a second optional device.

Transmitter Programming Procedures

Entering Transmitter Programming Mode

Procedure to enter programming mode using ignition and valet switch.

Programming Step Time Limits

Critical 15-second time limit for each step to maintain programming mode.

Programming Channels 1-5

Step-by-step instructions for programming transmitter channels 1 through 5.

Transmitter Management: Erasing and Reprogramming

Erasing Lost or Stolen Transmitters

Process to erase specific transmitters and retain desired ones.

Filling Transmitter Memory Slots

Method to fill all receiver slots for complete transmitter erasure.

Reprioritizing Transmitter Button Assignments

How to change a transmitter button's programmed function.

Transmitter Battery Replacement