EasyManua.ls Logo

Audiovox Pursuit PRO-9776 User Manual

Audiovox Pursuit PRO-9776
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
128-7856
1 of 12
Page 1
4 Button Remote Start Security System With
Plug-In Shock Sensor & Starter Disable
FEATURES:
2 Four Button Programmable RF Transmitters
Seven Channel Code Learning Receiver (capable of accepting 4 transmitters)
Code Hopping Technology
Selectable Manual Override Mode
Remote Panic in all modes
Protected Valet/Override
Combination Remote Start Safety Control/Valet/Programming Push-Button LED
Switch
Selectable Automatic Timed Start Mode
User Programmable Manual Override Code
7 Function LED - Arm / Disarm / Zone 1 / Zone 2 / Zone 3 / Valet / Arming
Intrusion Alert with Memory
Audible Arm / Disarm / Defective Zone / Tamper Confirmation
Instant Siren Activation All Entry Points
Starter Disable When Armed
True Last Door Arming
Defective Zone By-Pass
Active or Passive Arming Selectable
Programmable Auto Lock On / Off
Programmable Auto Unlock / Off/Drivers Door/All Doors
Programmable Door Lock Pulse Duration 1 Second / 3.5 Seconds/1 Sec L/ Dbl. U/L
Channel 4, 5, 6, & 7 Output to Control Optional Accessories
Programmable Active or Passive Door Locks
User Programmable Permanent Chirp Delete
On Command RF Chirp Delete from Transmitter Or Selectable Through Software
6 Tone Multi Tone Siren
Car Horn Activation for additional alarm response
Additional Negative Trigger Input
RF Inhibit with ignition on
Parking Light Flasher
Remote Keyless Entry With Optional Access Guard (must have power door locks)
Illuminated Entry
Plug In Dual Stage Shock Sensor
OPTIONS :
Telematic Upgrade Ready
Plug In Flash Logic By-Pass Capable
Remote Trunk Release (must have electronic trunk release)
Multiple Vehicle Capable
Remote Power Window Roll Up
Remote Garage Door Interface
Multiple Vehicle Capable
CAUTION ! Be certain that the vehicle is outdoors before using this or any remote vehicle
starting device. A running engine produces dangerous carbon monoxide fumes
which can be harmful or fatal if prolonged exposure occurs. DO NOT remote
start the vehicle if it is garaged.
Model PRO-9776
Owner’s Manual

Other manuals for Audiovox Pursuit PRO-9776

Question and Answer IconNeed help?

Do you have a question about the Audiovox Pursuit PRO-9776 and is the answer not in the manual?

Audiovox Pursuit PRO-9776 Specifications

General IconGeneral
Remote StartYes
Keyless EntryYes
Shock SensorYes
Panic ModeYes
Number of Buttons4
Remote ControlYes
Engine ImmobilizerYes
Starter KillYes
Door Lock ControlYes
Trunk ReleaseYes
Valet ModeYes
Auxiliary OutputsYes
Operating Voltage12V
RangeUp to 1 mile
Remote RangeUp to 1 mile

Summary

System Arming and Disarming Procedures

Code Hopping Transmitters

Explains the advanced and secure radio frequency transmission used by transmitters, preventing code grabbers.

Active System Arming

Details the steps to arm the system using the active mode with audible chirps and parking light confirmation.

Silent Active System Arming

Describes how to arm the system silently without audible chirps, using a prolonged button press.

Passive Automatic System Arming

Explains the automatic arming feature which activates after a 30-second delay when doors are closed.

Disarming the System

Provides instructions on how to disarm the security system using the disarm button on the transmitter.

Vehicle Protection and Override Functions

Protection While System is Armed

Outlines how the system protects the vehicle, triggering the alarm on entry point breach or impact.

Intrusion Warning Signals

Explains how the system indicates the type of intrusion that occurred via LED flash patterns.

PBLED Switch Functions

Details the function of the PBLED switch for valet mode, system overrides, and programming.

Manual System Override

Describes methods to disarm the system without the transmitter, using the PBLED switch or custom code.

Eliminating Arm/Disarm Chirps

Guides on how to permanently disable the audible arm/disarm chirps via a specific button sequence.

Advanced Operations and Remote Control

Remote Panic Operation

Explains how to use the panic feature for emergency situations by holding a transmitter button.

PBLED Safety Control Switch

Details how to disable the remote start function for servicing the vehicle by placing it in service mode.

Turbo Timer Mode

Describes the feature that allows the engine to run for a set period to cool a turbocharger after shutdown.

Remote Starting the Vehicle

Provides instructions on how to remotely start the vehicle using the transmitter for a set duration.

Automatic Start Up Timer Mode

Explains the feature for automatically starting the vehicle at timed intervals to keep it warm.

Additional Remote Functions

Lists optional accessories that can be controlled via channels 3, 4, 5, 6, and 7 of the transmitter.

Telematic Upgrade

Mentions the possibility of a telematic upgrade module for enhanced remote control of vehicle functions.

Feature and System Settings

Feature and Function Settings

A table detailing various system features and their customizable settings for installation technicians.

System Functions at a Glance

A summary of alarm dash LED indicators, siren chirp indications, and parking lamp indications.

Related product manuals