Audiovox Pursuit PRO-9642

To Next Page

Model PRO-9642

Owner's Manual

FEATURES:

w 2 Three Button Programmable RF Transmitters

w Three Channel Receiver (capable of accepting 4 transmitters)

w Anti-scan Technology

w Remote Panic in all modes

w Protected Valet

w 7 Function LED - Arm / Disarm / Zone 1 / Zone 2 / Zone 3 / Valet / Arming

w Intrusion Alert with Memory

w Audible Arm / Disarm / Defective Zone / Tamper Confirmation

w Instant Siren Activation

w Low Current Horn Output

w True Last Door Arming (hardwire only)

w Defective Zone By-Pass

w Hardwire or Voltage Sense Selectable

w Active or Passive Arming Selectable

w Programmable Auto Lock On / Off

w Programmable Auto Unlock On / Off

w Programmable Door Lock Pulse Duration 1 Second / 3.5 Seconds/1 Sec L/ Dbl. U/L

w Programmable Active or Passive Door Locks

w User Programmable Permanent Chirp Delete

w On Command RF Chirp Delete from Transmitter

w 6 Tone Multi-Tone Siren

w RF Inhibit with ignition on

w Parking Light Flasher

OPTIONS:

w Single or Dual Stage Shock Sensor

w Starter Disable

w Remote Trunk Release

w Remote Keyless Entry

w Multiple Vehicle Capable

w Remote Starter

w Remote Power Window Roll Up

w Remote Garage Door Interface

3 Button Remote Security System

Main Page

Need help?

Do you have a question about the Audiovox Pursuit PRO-9642 and is the answer not in the manual?

Summary

Arming the System

Active Arming

How to arm the system using the transmitter with audible feedback.

Silent Active Arming

How to arm the system silently via transmitter hold for 2 seconds.

Passive Automatic Arming

Automatic arming after doors are closed, with a 30-second delay.

System Protection and Disarming

Protection While Armed

Details how the system protects the vehicle when armed and triggered.

Disarming the System

Procedures for disarming the security system using the transmitter.

Silent Disarming

Instructions for disarming the system without audible feedback.

System Operation and Warning Signals

Handling System Sounds

How to stop the siren when the system is sounding without disarming.

Intrusion Warning Signals

Explains LED flash patterns indicating the type of intrusion detected.

Valet Switch Operation

How to use the valet switch to temporarily bypass alarm functions.

System Override and Customization

Manual System Override (Valet Switch)

Disarming the system without a transmitter using the valet switch.

Custom Code Programming

Procedure to program a personal override code for manual disarming.

Manual Override and Code Management

Manual System Override (Custom Code)

How to manually override the system using the custom code.

Advanced Features and Functions

Eliminating Arm;Disarm Chirps

How to permanently turn off or on the system's arm/disarm chirps.

Remote Panic Operation

Using the transmitter button as a panic alarm for emergencies.

Additional Remote Functions (Channel 3)

Activating optional accessories like trunk release via the transmitter.